Difference between revisions of "Module:Convert/extra/sandbox"

From blackwiki
Jump to navigation Jump to search
blackwiki>Johnuniq
(copy from current module)
blackwiki>Johnuniq
(move working units to main data, keeping those to be resolved from Module:Convert/extra)
Line 18: Line 18:
  
 
local extra_units = {
 
local extra_units = {
     ["$/g"] = {
+
["dpi"] = {
per      = { "$", "g" },
+
name1    = "DPI",
utype    = "cost $ per unit mass",
+
name2    = "DPI",
default  = "$/lb",
+
symbol  = "DPI",
     },
+
utype    = "length",
    ["$/oz"] = {
+
invert  = -1,
per      = { "$", "oz" },
+
iscomplex= true,
utype    = "cost $ per unit mass",
+
scale    = 1/0.0254,
default  = "$/g",
+
default  = "pitch",
     },
+
link     = "Dots per inch",
    ["gr water"] = {
+
},
        name1    = "grains water",
+
-- the convention is that resolution appears as simply micrometers dimensionally
        name2    = "grains water",
+
-- see Digital Photogrammetry: A Practical Course by Wilfried Linder
        symbol  = "gr H<sub>2</sub>O",
+
["pitch"] = {
        utype    = "volume",
+
name1    = "µm",
        scale    = 0.00000006479891,
+
name2    = "µm",
        default  = "cm3",
+
symbol  = "µm",
        link    = "Grain (unit)",
+
utype    = "length",
    },
+
invert  = 1,
    ["lb(f)"] = {
+
scale    = 0.000001,
        name1    = "pound",
+
default  = "dpi",
        symbol  = "lb",
+
link    = "Dots_per_inch#Proposed_metrication",
        utype    = "force",
+
},
        scale    = 4.4482216152605,
+
["dpcm"] = {
        default  = "N",
+
name1    = "dot/cm",
        link    = "Pound-force",
+
name2    = "dot/cm",
    },
+
symbol  = "dot/cm",
 +
utype    = "length",
 +
invert  = -1,
 +
iscomplex= true,
 +
scale    = 1/0.01,
 +
default  = "dpi",
 +
link    = "Dots_per_inch#Proposed_metrication",
 +
},
 +
["isp"] = {
 +
name1    = "second",
 +
name2    = "seconds";
 +
symbol  = "s",
 +
utype    = "speed",
 +
invert  = 1,
 +
scale    = 9.8066,
 +
default  = "km/s",
 +
link     = "specific impulse",
 +
},
 +
-- from F=ma, Ns/kg is equivalent to units of speed
 +
-- which is fortunate because convert couldn't handle it otherwise
 +
["Ns/kg"] = {
 +
name1    = "N-s/kg",
 +
name2    = "N-s/kg";
 +
symbol  = "N-s/kg",
 +
utype    = "speed",
 +
invert  = 1,
 +
scale    = 1,
 +
default  = "isp",
 +
link    = "specific impulse",
 +
},
 +
["kNs/kg"] = {
 +
name1    = "kN-s/kg",
 +
name2    = "kN-s/kg";
 +
symbol  = "kN-s/kg",
 +
utype    = "speed",
 +
invert  = 1,
 +
scale    = 1000,
 +
default  = "isp",
 +
link     = "specific impulse",
 +
},
 +
-- units of inverse speed, because invert is negative
 +
["si tsfc"] = {
 +
name1    = "g/(kN·s)",
 +
name2    = "g/(kN·s)",
 +
symbol  = "g/(kN·s)",
 +
utype    = "speed",
 +
invert  = -1,
 +
iscomplex= true,
 +
scale    = 1/101972/9.8066,
 +
default  = "tsfc",
 +
link    = "thrust specific fuel consumption",
 +
},
 +
-- units of inverse speed, because invert is negative
 +
["tsfc"] = {
 +
name1    = "lb/(lbf·h)",
 +
name2    = "lb/(lbf·h)",
 +
symbol  = "lb/(lbf·h)",
 +
utype    = "speed",
 +
invert  = -1,
 +
iscomplex= true,
 +
scale    = 1/9.8066/3600,
 +
default  = "si_tsfc",
 +
link    = "thrust specific fuel consumption",
 +
},
 
}
 
}
  
 
return { extra_units = extra_units }
 
return { extra_units = extra_units }

Revision as of 08:10, 24 December 2013

Documentation for this module may be created at Module:Convert/extra/sandbox/doc

-- Extra conversion data used by Module:Convert.
--
-- [[Module:Convert/data]] defines all units and is transcluded in all pages
-- where [[Module:Convert]] is used. Testing new units by editing that module
-- would invalidate the cache for all affected pages.
--
-- For quick changes and experiments with new units, this module can be edited.
-- Since this module is transcluded in only a small number of pages, changes
-- should cause little server overhead and should propagate quickly.
--
-- If a unit is defined in the data module, any definition here is ignored,
-- so defining the same unit in both modules is not an error.
-- A unit defined here can refer to units that are also defined here, and
-- can refer to units defined in the data module.
--
-- Periodically, those extra units that are wanted permanently can be removed
-- from here after being added to [[Module:Convert/data]].

local extra_units = {
	["dpi"] = {
		name1    = "DPI",
		name2    = "DPI",
		symbol   = "DPI",
		utype    = "length",
		invert   = -1,
		iscomplex= true,
		scale    = 1/0.0254,
		default  = "pitch",
		link     = "Dots per inch",
	},
	-- the convention is that resolution appears as simply micrometers dimensionally
	-- see Digital Photogrammetry: A Practical Course by Wilfried Linder
	["pitch"] = {
		name1    = "µm",
		name2    = "µm",
		symbol   = "µm",
		utype    = "length",
		invert   = 1,
		scale    = 0.000001,
		default  = "dpi",
		link     = "Dots_per_inch#Proposed_metrication",
	},
	["dpcm"] = {
		name1    = "dot/cm",
		name2    = "dot/cm",
		symbol   = "dot/cm",
		utype    = "length",
		invert   = -1,
		iscomplex= true,
		scale    = 1/0.01,
		default  = "dpi",
		link     = "Dots_per_inch#Proposed_metrication",
	},
	["isp"] = {
		name1    = "second",
		name2    = "seconds";
		symbol   = "s",
		utype    = "speed",
		invert   = 1,
		scale    = 9.8066,
		default  = "km/s",
		link     = "specific impulse",
	},
	-- from F=ma, Ns/kg is equivalent to units of speed
	-- which is fortunate because convert couldn't handle it otherwise
	["Ns/kg"] = {
		name1    = "N-s/kg",
		name2    = "N-s/kg";
		symbol   = "N-s/kg",
		utype    = "speed",
		invert   = 1,
		scale    = 1,
		default  = "isp",
		link     = "specific impulse",
	},
	["kNs/kg"] = {
		name1    = "kN-s/kg",
		name2    = "kN-s/kg";
		symbol   = "kN-s/kg",
		utype    = "speed",
		invert   = 1,
		scale    = 1000,
		default  = "isp",
		link     = "specific impulse",
	},
	-- units of inverse speed, because invert is negative
	["si tsfc"] = {
		name1    = "g/(kN·s)",
		name2    = "g/(kN·s)",
		symbol   = "g/(kN·s)",
		utype    = "speed",
		invert   = -1,
		iscomplex= true,
		scale    = 1/101972/9.8066,
		default  = "tsfc",
		link     = "thrust specific fuel consumption",
	},
	-- units of inverse speed, because invert is negative
	["tsfc"] = {
		name1    = "lb/(lbf·h)",
		name2    = "lb/(lbf·h)",
		symbol   = "lb/(lbf·h)",
		utype    = "speed",
		invert   = -1,
		iscomplex= true,
		scale    = 1/9.8066/3600,
		default  = "si_tsfc",
		link     = "thrust specific fuel consumption",
	},
}

return { extra_units = extra_units }